Heavy Cover Roundslings

Heavy Cover Roundslings

Big Easy Heavy Cover Roundslings are made using a heavy duty, double wall nylon outer cover. This helps to increase the life of the sling by providing built-in abrasion resistance without the need for bulky wear pads or extra material.

  • Sling made with heavy duty double wall nylon cover
  • Non-abrasive nylon cover reduces marring on painted and plated surfaces
  • Lightweight: Ease of use compared to wire rope and chain
  • Additional Sleeves Available
  • Low Stretch: Approximately 3% at rated capacity
Part #Color
Code
VerticalChokerBasket at 90°Basket at 45°Minimum
Length
Weight Per Foot (lbs.)Body DIA
Relaxed
BHC150ORANGE13,20010,60026,40018,0003’0.851 3/8”
BHC180ORANGE16,80013,40033,60023,0003’0.981 3/8”
BHC240BLUE21,20017,00042,40029,0003’1.371 3/4”
BHC300ORANGE25,00020,00050,00035,0004’1.582”
BHC360GREY31,00024,80062,00043,3004’1.792 1/4”
BHC400ORANGE40,00032,00080,00056,5006’2.322 1/2”
BHC600BROWN53,00042,400106,00074,0006’2.952 3/4”
BHC800OLIVE66,00052,800132,00093,0006’3.583 1/8”
BHC1000BLACK90,00072,000180,000127,0006’4.533 5/8”
BHC1100BLACK100,00080,000200,000141,0006’5.154 1/4”
BHC1200BLACK110,00088,000220,000155,0008’5.674 1/2”
WARNING: Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should never be used at angles less than 30 degrees.

Manufacturing Tolerance (applies to roundslings when new, at the time of final manufacture):
• 13,200 lbs. or less – +/-1” + 1% of specified length
• Higher than 13,200 lbs. up to 53,000 lbs. – +/-2” + 1% of specified length
• Higher than 53,000 lbs. – +/-3” + 1% of specified length

Matched Set Length Tolerance: When multiple legs of a bridle sling are made, or when multiple slings are prescribed to be made within a Matched Set Tolerance, their length variance from their nominal length shall remain within a dimension equal to one-half of their corresponding Standard Length Tolerance Values.

Measurement Method: Roundsling length is measured with the sling laid flat while being manually pulled taut.

Industries We Serve
AEROSPACE
AGRICULTURE
AUTOMOTIVE
CARGO
CONSTRUCTION
ENERGY
FREIGHT
LOGISTICS
MANUFACTURING
MARINE
MILITARY
OIL & GAS
SHIPPING
TRANSPORTATION
WAREHOUSING