An Eye & Eye Roundsling is made by adding an extra abrasion resistant sleeve to the body of a BRS. Can increase the life of the sling when abrasion to the body is an issue.
Features & Benefits
| Part # | Color Code | Vertical | Choker | Basket at 90° | Basket at 45° | Min. Length | Weight Per Foot (lbs.) | Body DIA at Load | Standard Eye Length |
|---|---|---|---|---|---|---|---|---|---|
| EEBRS30 | PURPLE | 2,600 | 2,100 | 5,200 | 3,600 | 3’ | 0.25 | 2.25” | 12” |
| EEBRS60 | GREEN | 5,300 | 4,420 | 10,600 | 7,400 | 3’ | 0.36 | 2.5” | 12” |
| EEBRS90 | YELLOW | 8,400 | 6,700 | 16,800 | 11,800 | 3’ | 0.55 | 2.5” | 12” |
| EEBRS120 | TAN | 10,600 | 8,500 | 21,200 | 14,000 | 3’ | 0.65 | 3.5” | 12” |
| EEBRS150 | RED | 13,200 | 10,600 | 26,400 | 18,000 | 3’ | 0.85 | 3.5” | 14” |
| EEBRS180 | WHITE | 16,800 | 13,400 | 33,600 | 23,000 | 3’ | 0.95 | 3.5” | 16” |
| EEBRS240 | BLUE | 21,200 | 17,000 | 42,400 | 29,000 | 3’ | 1.5 | 4.5” | 16” |
| EEBRS300 | ORANGE | 25,000 | 20,000 | 50,000 | 35,000 | 4’ | 2 | 5.5” | 18” |
| EEBRS360 | GREY | 31,000 | 24,800 | 62,000 | 43,300 | 4’ | 2.3 | 6” | 20” |
| EEBRS400 | ORANGE | 40,000 | 32,000 | 80,000 | 56,500 | 4’ | 2.7 | 6” | 24” |
| EEBRS600 | BROWN | 53,000 | 42,400 | 106,000 | 74,000 | 6’ | 3.3 | 7” | 24” |
| EEBRS800 | OLIVE | 66,000 | 52,800 | 132,000 | 93,000 | 6’ | 3.9 | 8” | 30” |
| EEBRS1000 | BLACK | 90,000 | 72,000 | 180,000 | 127,000 | 6’ | 4.8 | 9” | 36” |
| EEBRS1100 | BLACK | 100,000 | 80,000 | 200,000 | 141,000 | 6’ | 5.3 | 9.5” | 36” |
| EEBRS1200 | BLACK | 110,000 | 88,000 | 220,000 | 155,000 | 8’ | 5.77 | 9.75” | 36” |
Manufacturing Tolerance (applies to roundslings when new, at the time of final manufacture):
• 13,200 lbs. or less – +/-1” + 1% of specified length
• Higher than 13,200 lbs. up to 53,000 lbs. – +/-2” + 1% of specified length
• Higher than 53,000 lbs. – +/-3” + 1% of specified length
Matched Set Length Tolerance: When multiple legs of a bridle sling are made, or when multiple slings are prescribed to be made within a Matched Set Tolerance, their length variance from their nominal length shall remain within a dimension equal to one-half of their corresponding Standard Length Tolerance Values.
Measurement Method: Roundsling length is measured with the sling laid flat while being manually pulled taut.
